Açık Akademik Arşiv Sistemi

Browsing Mühendislik Fakültesi by Title

Browsing Mühendislik Fakültesi by Title

Sort by: Order: Results:

  • KEY ENGINEERING MATERIALS 
    Türk, Ahmet (TRANS TECH PUBLICATIONS LTD, 2004)
    In this study, low carbon steel substrate was coated with WC-Ni powder by using plasma spray process in order to increase the wear and corrosion resistance of the material. Wear tests were applied to the produced samples ...
  • Key Engineering Materials 
    Şen, Uğur (TRANS TECH PUBLICATIONS LTD, 2004)
    Thermo-reactive diffusion (N and V) on AISI 1020 steel has been obtained by an initial gas nitriding followed by vanadizing. Vanadizing was performed by pack method in the powder mixture consisting of ferro-vanadium, ...
  • KEY ENGINEERING MATERIALS 
    Toplan, Nil; Yılmaz, Fevzi (TRANS TECH PUBLICATIONS LTD, 2004)
    Plasma spraying, originally a surfacing technology used for ceramic coating of metal and non-metal substrates, is also suitable for the production of bulk ceramics, such as pipes, crucibles and sensors, etc. from various ...
  • KEY ENGINEERING MATERIALS 
    Türk, Ahmet (TRANS TECH PUBLICATIONS LTD, 2004)
    Ni-graphite coatings, due to their high hardness and chemical inertness, are often used as protective coatings against friction and corrosion. In this paper, the preparation of a nickel-graphite coating on mild steel ...
  • KEY ENGINEERING MATERIALS 
    Toplan, Hüseyin Özkan (TRANS TECH PUBLICATIONS LTD, 2004)
    Zinc oxide varistor has classically been prepared by conventional ceramic techniques. In this study, ZnO varistor powder with homogeneous distribution grain size and shape is prepared by both controlled chemical process ...
  • Kinetic and isotherm studies of Cu(II) biosorption onto valonia tannin resin 
    Şengil, İsmail Ayhan; Özacar, Mahmut (ELSEVIER SCIENCE BV, 2009)
    The biosorption of Cu(II) from aqueous solutions by valonia tannin resin was investigated as a function of particle size, initial pH, contact time and initial metal ion concentration. The aim of this study was to understand ...
  • Kinetic and isotherm studies of Cu(II) biosorption onto valonia tannin resin 
    Şengil, İsmail Ayhan (2009)
  • Kinetic Characterization of Methanobacterium bryantii M.o.H. 
    Karadağlı, Fatih (2005)
  • Kinetics and thermodynamics of biodiesel wastewater treatment by using ozonation process 
    Tanattı, Nazire Pınar; Mehmetbaşoğlu, Meryem; Şengil, İsmail Ayhan; Halil Aksu; Ebrar Emin (DESALINATION PUBL, 2019)
    Biodiesel wastewaters contain high amounts of oil, methanol, soap and glycerin. These wastewaters pollutant concentrations as chemical oxygen demand (COD), total organic carbon (TOC), glycerin and Me0H are fluctuating in ...
  • Kinetics of bonded AISI M2 high speed steel 
    Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2011)
    The present study reports on kinetics of bonded AISI M2 high speed steel. Boronizing thermochemical treatment was carried out in a solid medium consisting of EKabor powders at 850 degrees C, 900 degrees C and 950 degrees ...
  • Kinetics of Boride Layers Formed on the Surface of AISI 4140 Steel 
    Şen, Şaduman; Bindal, Cuma (2004)
  • Kinetics of borided 31CrMoV9 and 34CrAlNi7 steels 
    Çelebi Efe, Gözde Fatma; İpek, Mediha; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE INC, 2008)
    In this study, kinetics of borides formed on the surface of 31CrMoV9 and 34CrAlNi7 steels borided in solid medium consisting of Ekabor II at 850-900-950 degrees C for 2, 4, 6 and 8 h were investigated. Scanning electron ...
  • Kinetics of boriding AISI W1 steel 
    Özbek, İbrahim; Genel, Kenan; Bindal, Cuma (2003)
  • Kinetics of boriding AISI W1 steel 
    Özbek, İbrahim; Genel, Kenan; Bindal, Cuma (2003)
  • Kinetics of boriding of AISI W1 steel 
    Genel, Kenan; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE SA, 2003)
    A technologically interesting characteristic of boriding is the production of a hard, wear-resistant coating layer on the steel substrate. In this study, case properties of borided AISI W1 steel-has been investigated by ...
  • Kinetics of boriding of AISI W1 steel 
    Genel, Kenan; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE SA, 2003)
    A technologically interesting characteristic of boriding is the production of a hard, wear-resistant coating layer on the steel substrate. In this study, case properties of borided AISI W1 steel-has been investigated by ...
  • Kinetics of niobium carbide coating produced on AISI 1040 steel by thermo-reactive deposition technique 
    Şen, Uğur (ELSEVIER SCIENCE SA, 2004)
    There are a lot of technologically interesting characteristics of niobium carbide coating deposited by pack method which is the production of hard, wear-resistant, oxidation and Corrosion resistant coating layer on the ...
  • Kinetics of thermal decomposition of plumbo-jarosite 
    Özacar, Mahmut; Alp, Ahmet; Aydın, Ali Osman (KLUWER ACADEMIC PUBL, 2000)
    An investigation was carried out on the kinetics of thermal decomposition of plumbo-jarosite. The kinetic models of dissociation of the compounds in the ore were identified. The results of the kinetic studies and the ...
  • Kinetics of Thermal Decomposition of Plumbo-Jarosite 
    Alp, Ahmet; Aydın, Ali Osman (2000)
  • Kinetics of titanium nitride coatings deposited by thermo-reactive deposition technique 
    Şen, Uğur (PERGAMON-ELSEVIER SCIENCE LTD, 2004)
    In this study, the growth kinetics of titanium nitride layer deposited on pre-nitrided AISI 1020 steel samples by thermo-reactive diffusion (TRD) techniques in a solid medium was reported. Steel was at first tufftrided and ...