Açık Akademik Arşiv Sistemi
Browsing Makine Mühendisliği / Mechanical Engineering by Subject "Mechanics"
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Mühendislik Fakültesi
- →
- Makine Mühendisliği / Mechanical Engineering
- →
- Browsing Makine Mühendisliği / Mechanical Engineering by Subject
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Makine Mühendisliği / Mechanical Engineering by Subject "Mechanics"
Now showing items 1-20 of 57
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2003)This study presents an application of artificial neural networks (ANNs) to predict the heat transfer rate of the wire-on-tube type heat exchanger. A back propagation algorithm, the most common learning method for ANNs, is ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2017)Details related to modeling and experimental analyses for a new type of specimen, which is proposed to be used for mixed mode-I/II fracture tests, are presented. The specimen is similar to a T-shape and requires less ...
-
(INDERSCIENCE ENTERPRISES LTD, 2012)The classical Lattice Boltzmann Method is based on an orthogonal, equidistant lattice structure. Thus, representation of non-rectangular boundaries deserves further attention. Besides the straightforward possibility of ...
-
A novel test system for mixed mode-I/II/III fracture tests - Part 1: Modeling and numerical analyses (PERGAMON-ELSEVIER SCIENCE LTD, 2019)In this paper, a new test system is proposed to be used for three-dimensional mixed mode-I/II/III fracture tests. Considering different types of configurations under high mode mixity combinations, three-dimensional stress ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2019)In this part of the study, details of mixed mode-I/II/III fracture experiments for the CTST (Compact Tension-Shearing and Tearing) specimen, for which modeling and analyses results are given in Part 1, are presented. ...
-
(ELSEVIER SCIENCE BV, 2012)A notch analysis method using a finite element basis is integrated with two critical plane multiaxial fatigue criteria to simulate combined bending-torsion fatigue of SAE 1045 notched specimen. For both in-phase and ...
-
(TAYLOR & FRANCIS INC, 2019)Future developments in electronic industries will require efficient cooling systems to dissipate large amount of heat produced over a small area. In recent years, interest has grown in extending the use of vapor chambers ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)The thermal control of future nanosatellite will be challenging due to dedicated panel surface area for radiation. The thermal control concept is to keep the payload within allowable temperature ranges. In order to predict ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2006)The ability of an artificial neural network model, using a back propagation learning algorithm, to predict specific fuel consumption and exhaust temperature of a Diesel engine for various injection timings is studied. The ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)This paper, concentrates on a three-dimensional (3D) computational fluid-dynamics (CFD) model for coal combustion and electrode radiation inside an electric-arc furnace (EAF). Simulation of the melting process includes ...
-
(TAYLOR & FRANCIS INC, 2006)The numerical and experimental study of heat transfer characteristics in an enhanced channel with turbulent flow is presented. Numerical computations have been done for a periodic element of the channel with periodically ...
-
(INDERSCIENCE ENTERPRISES LTD, 2018)The characteristics of convective heat transfer and friction factor for periodic corrugated channels are investigated numerically. In the numerical study, the finite volume method (FVM) is used. Three different Reynolds ...
-
(ISFAHAN UNIV TECHNOLOGY, 2018)Pumps are irreplaceable products in various systems and processes. Pumps can be manufactured in various size in industry. The mini pumps are commonly used in some household electrical appliances, automobile etc. Some pumping ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2008)Single-zone Wiebe-function HCCI combustion models tend to over-predict the peak cylinder pressure. The over-prediction arises because it is not possible for the standard Wiebe function to fully match both the slower ...
-
Effect of rounding of protruding edge on convection heat transfer in a converging-diverging channel (PERGAMON-ELSEVIER SCIENCE LTD, 2008)Experiments were performed to determine convection heat transfer characteristics for the rounding of the protruding peaks of a corrugated channel. Results were carried out for a Prandtl number of 0.7 in the Reynolds number ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2006)Tests were performed on a six cylinder, direct injection, turbocharged Diesel engine whose pistons were coated with a 350 mu m thickness of MgZrO3 over a 150 mu m thickness of NiCrAl bond coat. CaZrO3 was employed as the ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2013)In this study, trout oil methyl ester fuel (TOME) was prepared by transesterification using potassium hydroxide as catalyst. The trout oil and its blends (B10, B20, 840 and B50) were tested in a single-cylinder natural ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2005)Cement production has been one of the most energy intensive industries in the world. In order to produce clinker, rotary kilns are widely used in cement plants. This paper deals with the energy audit analysis of a dry type ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2009)Combustion in HCCI engines is a controlled auto-ignition of well-mixed fuel, air and residual gas. The thermal conditions of the combustion chamber are governed by chemical kinetics strongly Coupled with heat transfer from ...
-
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)In this work, experimental results from a homogenous charge compression ignition (HCCI) engine fueled with PRF-85 (85% iso-octane and 15% n-heptane) were used to compare performances of combustion codes for zero dimensional ...
Now showing items 1-20 of 57
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
