Effect of pyrolysis temperature and heating rate on biochar obtained from pyrolysis of safflower seed press cake

Angın, Dilek

dc.contributor.authors	Angin, D;
dc.date.accessioned	2020-03-06T08:32:39Z
dc.date.available	2020-03-06T08:32:39Z
dc.date.issued	2013
dc.identifier.citation	Angin, D; (2013). Effect of pyrolysis temperature and heating rate on biochar obtained from pyrolysis of safflower seed press cake. BIORESOURCE TECHNOLOGY, 128, 597-593
dc.identifier.issn	0960-8524
dc.identifier.uri	https://doi.org/10.1016/j.biortech.2012.10.150
dc.identifier.uri	https://hdl.handle.net/20.500.12619/67353
dc.description.abstract	Biochar is carbon-rich product generated from biomass through pyrolysis. In this study, the effects of pyrolysis temperature and heating rate on the yield and physicochemical and morphological properties of biochars obtained from safflower seed press cake were investigated. The results showed that the biochar yield and quality depend principally on the applied temperature where pyrolysis at 600 degrees C leaves a biochar with higher fixed carbon content (80.70%) and percentage carbon (73.75%), and higher heating value (30.27 MJ kg(-1)) in comparison with the original feedstock (SPC) and low volatile matter content (9.80%). The biochars had low surface areas (1.89-4.23 m(2)/g) and contained predominantly aromatic compounds. The biochar could be used for the production of activated carbon, in fuel applications, and water purification processes. (C) 2012 Elsevier Ltd. All rights reserved.
dc.language	English
dc.publisher	ELSEVIER SCI LTD
dc.subject	Energy & Fuels
dc.title	Effect of pyrolysis temperature and heating rate on biochar obtained from pyrolysis of safflower seed press cake
dc.type	Article
dc.identifier.volume	128
dc.identifier.startpage	593
dc.identifier.endpage	597
dc.contributor.department	Sakarya Üniversitesi/Mühendislik Fakültesi/Gıda Mühendisliği Bölümü
dc.contributor.saüauthor	Angın, Dilek
dc.relation.journal	BIORESOURCE TECHNOLOGY
dc.identifier.wos	WOS:000315545800084
dc.identifier.doi	10.1016/j.biortech.2012.10.150
dc.identifier.eissn	1873-2976
dc.contributor.author	Angın, Dilek