Tribological Properties of Nanoclay Reinforced Polyamide-6/Polypropylene Blend

Mimaroğlu, Abdullah; Ünal, Hüseyin; S. H. Yetgin

DSpace Home
→
Fakülteler / Faculties
→
Mühendislik Fakültesi
→
Makine Mühendisliği / Mechanical Engineering
→
Makale Koleksiyonu
→
View Item

dc.contributor.authors	Mimaroglu, A; Unal, H; Yetgin, SH;
dc.date.accessioned	2020-02-26T08:46:40Z
dc.date.available	2020-02-26T08:46:40Z
dc.date.issued	2018
dc.identifier.citation	Mimaroglu, A; Unal, H; Yetgin, SH; (2018). Tribological Properties of Nanoclay Reinforced Polyamide-6/Polypropylene Blend. MACROMOLECULAR SYMPOSIA, 379, -
dc.identifier.issn	1022-1360
dc.identifier.uri	https://doi.org/10.1002/masy.201700022
dc.identifier.uri	https://hdl.handle.net/20.500.12619/49976
dc.description.abstract	In this study, the tribological performance of polyamide-6 (PA-6), polypropylene (PP), polyamide-6/polypropylene (PA-6/PP) polymer blend, and nanoclay reinforced polyamide-6/polypropylene composite are investigated. Nanoclay reinforced polymer composite is produced by melt compounding using co-rotating twin screw extruder followed by injection moulding. Tribological studies are carried out using a pin-on-stainless steel disc configuration under dry sliding conditions. Tribological tests are carried out at sliding speed of 0.5 ms(-1) and applied load values of 25, 50,100, 150 N. The friction coefficient and specific wear rate values are obtained and evaluated. The results show that the addition of nanoclay into the PA-6/PP polymer blend reduced their coefficient of friction and specific wear rate values. The lowest coefficient of friction and specific wear rate values are for nanoclay reinforced PA-6/PP blend. The highest coefficient of friction and specific wear rate values are for PA-6 polymer.
dc.language	English
dc.publisher	WILEY-V C H VERLAG GMBH
dc.subject	Polymer Science
dc.title	Tribological Properties of Nanoclay Reinforced Polyamide-6/Polypropylene Blend
dc.type	Proceedings Paper
dc.identifier.volume	379
dc.contributor.department	Sakarya Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü
dc.contributor.saüauthor	Mimaroğlu, Abdullah
dc.contributor.saüauthor	Ünal, Hüseyin
dc.relation.journal	MACROMOLECULAR SYMPOSIA
dc.identifier.wos	WOS:000434976400005
dc.identifier.doi	10.1002/masy.201700022
dc.identifier.eissn	1521-3900
dc.contributor.author	Mimaroğlu, Abdullah
dc.contributor.author	Ünal, Hüseyin
dc.contributor.author	S. H. Yetgin