Açık Akademik Arşiv Sistemi

Prediction and optimization of tribological behavior of nylon composites using Taguchi analysis method

Show simple item record

dc.contributor.authors Unal, H; Ficici, F; Mimaroglu, A; Demirkol, A; Kirdar, A;
dc.date.accessioned 2020-02-26T08:46:09Z
dc.date.available 2020-02-26T08:46:09Z
dc.date.issued 2016
dc.identifier.citation Unal, H; Ficici, F; Mimaroglu, A; Demirkol, A; Kirdar, A; (2016). Prediction and optimization of tribological behavior of nylon composites using Taguchi analysis method. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 38, 2104-2097
dc.identifier.issn 1678-5878
dc.identifier.uri https://doi.org/10.1007/s40430-015-0398-1
dc.identifier.uri https://hdl.handle.net/20.500.12619/49925
dc.description.abstract In this study, the tribological performance of graphite and wax filled nylon composites was predicted and optimized with the assistance of the Taguchi analysis method. Experimental data from our previous published work are handled. The experimental results are transformed into a signal-to-noise (S/N) ratio using the Taguchi method. This ratio presents the quality characteristics of the experimental results. Tribological performance of nylon 6 (polyamide 6) composites was predicted and optimized. The type of material, applied load, and sliding speed exert effects on the specific wear rate, at 85.06, 2.17, and 3.26, were obtained, respectively. Furthermore, the estimated S/N ratio using the optimum testing parameters for specific wear rate was calculated and a good agreement was observed between the predicted and experimentally determined values for a confidence level above 90.
dc.language English
dc.publisher SPRINGER HEIDELBERG
dc.subject Engineering
dc.title Prediction and optimization of tribological behavior of nylon composites using Taguchi analysis method
dc.type Article
dc.identifier.volume 38
dc.identifier.startpage 2097
dc.identifier.endpage 2104
dc.contributor.department Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Ünal, Hüseyin
dc.contributor.saüauthor Fıçıcı, Ferit
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.contributor.saüauthor Demirkol, Aşkın
dc.relation.journal JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
dc.identifier.wos WOS:000383503900023
dc.identifier.doi 10.1007/s40430-015-0398-1
dc.identifier.eissn 1806-3691
dc.contributor.author Ünal, Hüseyin
dc.contributor.author Fıçıcı, Ferit
dc.contributor.author Mimaroğlu, Abdullah
dc.contributor.author Demirkol, Aşkın
dc.contributor.author A. Kirdar


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record