Açık Akademik Arşiv Sistemi

STUDY OF THE MICROSTRUCTURE AND OXIDATION BEHAVIOR OF YSZ AND YSZ/Al2O3 TBCs WITH HVOF BOND COATINGS

Show simple item record

dc.contributor.authors Karaoglanli, AC; Erdogan, G; Kahraman, Y; Turk, A; Ustel, F; Ozdemir, I;
dc.date.accessioned 2020-02-26T08:45:15Z
dc.date.available 2020-02-26T08:45:15Z
dc.date.issued 2012
dc.identifier.citation Karaoglanli, AC; Erdogan, G; Kahraman, Y; Turk, A; Ustel, F; Ozdemir, I; (2012). STUDY OF THE MICROSTRUCTURE AND OXIDATION BEHAVIOR OF YSZ AND YSZ/Al2O3 TBCs WITH HVOF BOND COATINGS. MATERIALI IN TEHNOLOGIJE, 46, 444-439
dc.identifier.issn 1580-2949
dc.identifier.uri https://hdl.handle.net/20.500.12619/49808
dc.description.abstract A significant improvement in efficiency has been achieved by using thermal barrier coatings (TBCs) in gas turbines and diesel engines. A typical TBC is a multilayered coating system that comprises an oxidation-resistant metallic bond coating (BC) and a thermally insulating ceramic top coating (TC). Under service conditions an Al2O3 inter-layer, the thermally grown oxide (TGO), forms in the interface between the bond and the top coating, by a chemical reaction between the metallic aluminum from the BC material and the oxygen that comes from the environment through the pore channels of the TC. The aim of the present study is to describe the TGO formation on metallic bond coats deposited using the high-velocity oxygen fuel (HVOF) spraying technique. Therefore. TBCs that consist of a YSZ top (ZrO2 + 8 % Y2O3) and YSZ-Al2O3 double-layer systems with CoNiCrAlY bond coats were deposited on Inconel 718 super-alloy substrates. The bond coats were applied via HVOF, with the ceramic top coats being applied by atmospheric plasma spraying (APS) as well. The oxidation behaviors of the TBC systems were investigated. The oxidation tests were performed at 1000 degrees C in an air atmosphere for (8, 24, 50) h. The formation and growth of the TGO layers and the microstructural changes during the oxidation tests were scrutinized systematically. The results indicate that the TBC coating with the YSZ-Al2O3 double layer had a higher oxidation resistance and a lower TGO layer growth than that of the traditional TBC system. Likewise, the initial state of the porosity plays a critical role in enhancing or limiting the growth of the TGO scale in the TBC.
dc.language English
dc.publisher INST ZA KOVINSKE MATERIALE I IN TEHNOLOGIE
dc.subject Materials Science
dc.title STUDY OF THE MICROSTRUCTURE AND OXIDATION BEHAVIOR OF YSZ AND YSZ/Al2O3 TBCs WITH HVOF BOND COATINGS
dc.type Article
dc.identifier.volume 46
dc.identifier.startpage 439
dc.identifier.endpage 444
dc.contributor.department Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Erdoğan, Garip
dc.contributor.saüauthor Kahraman, Yaşar
dc.contributor.saüauthor Türk, Ahmet
dc.contributor.saüauthor Üstel, Fatih
dc.relation.journal MATERIALI IN TEHNOLOGIJE
dc.identifier.wos WOS:000310039700003
dc.identifier.eissn 1580-3414
dc.contributor.author Erdoğan, Garip
dc.contributor.author Kahraman, Yaşar
dc.contributor.author Türk, Ahmet
dc.contributor.author Üstel, Fatih


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record