Açık Akademik Arşiv Sistemi

Evaluation of the Performance of H3BO3-filled Polyamide Composite

Show simple item record

dc.contributor.authors Unal, H; Yetgin, SH; Sen, U; Mimaroglu, A;
dc.date.accessioned 2020-02-26T08:44:53Z
dc.date.available 2020-02-26T08:44:53Z
dc.date.issued 2010
dc.identifier.citation Unal, H; Yetgin, SH; Sen, U; Mimaroglu, A; (2010). Evaluation of the Performance of H3BO3-filled Polyamide Composite. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 29, 993-986
dc.identifier.issn 0731-6844
dc.identifier.uri https://doi.org/10.1177/0731684408102699
dc.identifier.uri https://hdl.handle.net/20.500.12619/49734
dc.description.abstract In this study, the performance of boric acid (H3BO3)-filled polyamide composites were studied and evaluated at dry-sliding friction conditions. Wear tests were carried out using configuration of composite pin on a rotating AISI D2 steel disc. Test conditions were atmospheric conditions, 10, 30, 50N applied load values, and 0.4, 0.80, 1.20 m/s sliding speeds. The results show a large drop in the coefficient of friction of PA6 with the addition of H3BO3 filler and a significant change in specific wear rate. Furthermore, the coefficient of friction decreases while the specific wear increases with the increase in sliding speed and applied load values, respectively. Moreover, for the range of load and sliding speed values in this study, the coefficient of friction also registered lower values with the increase in H3BO3 content percentage. The influence of boric acid on the coefficient of friction and wear is more pronounced at severe working conditions. Finally, the coefficient of friction of H3BO3-filled composite is a round 0.1 value and its specific wear rate is in the order of 10(-4) m(3)/N m.
dc.language English
dc.publisher SAGE PUBLICATIONS LTD
dc.subject Polymer Science
dc.title Evaluation of the Performance of H3BO3-filled Polyamide Composite
dc.type Article
dc.identifier.volume 29
dc.identifier.startpage 986
dc.identifier.endpage 993
dc.contributor.department Sakarya Uygulamalı Bilimler Üniversitesi/Teknoloji Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü
dc.contributor.saüauthor Ünal, Hüseyin
dc.contributor.saüauthor Yetgin, Salih Hakan
dc.contributor.saüauthor Şen, Uğur
dc.contributor.saüauthor Mimaroğlu, Abdullah
dc.relation.journal JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
dc.identifier.wos WOS:000276405200004
dc.identifier.doi 10.1177/0731684408102699
dc.contributor.author Ünal, Hüseyin
dc.contributor.author Yetgin, Salih Hakan
dc.contributor.author Şen, Uğur
dc.contributor.author Mimaroğlu, Abdullah


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record