Açık Akademik Arşiv Sistemi

Experimental study of NOx emissions and injection timing of a low heat rejection diesel engine

Show simple item record

dc.contributor.authors Buyukkaya, E; Cerit, M;
dc.date.accessioned 2020-02-26T08:44:44Z
dc.date.available 2020-02-26T08:44:44Z
dc.date.issued 2008
dc.identifier.citation Buyukkaya, E; Cerit, M; (2008). Experimental study of NOx emissions and injection timing of a low heat rejection diesel engine. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 47, 1106-1096
dc.identifier.issn 1290-0729
dc.identifier.uri https://doi.org/10.1016/j.ijthermalsci.2007.07.009
dc.identifier.uri https://hdl.handle.net/20.500.12619/49693
dc.description.abstract In this study, an experimental study of the effects of injection timing on nitrogen oxide (NOx) emissions of a low heat rejection (LHR) turbocharged direct injection diesel engine was conducted. The injection timing and brake specific fuel consumption (BSFC) trade-off must be considered together in performance and NOx emissions analysis. For the original injection timing of the 20 degrees before top dead centre, the brake specific fuel consumption value of the LHR engine was approximately 6% lower than the original engine. NOx emissions were also higher (about 9%) than the original engine. To reduce NOx emissions released by diesel engines, the method of injection timing retard was utilized. Thus, the LHR engine was tested for two different injection timings; 18 degrees and 16 degrees crank angle before top dead centre (BTDC), at the same engine speeds and load conditions. The results showed that the BSFC and NO, emissions were reduced 2% and 11%, respectively by retarding the injection timing. Optimum injection timing for the LHR engine was obtained through decreasing by 2 degrees BTDC. (c) 2007 Elsevier Masson SAS. All rights reserved.
dc.language English
dc.publisher ELSEVIER FRANCE-EDITIONS SCIENTIFIQUES MEDICALES ELSEVIER
dc.subject Engineering
dc.title Experimental study of NOx emissions and injection timing of a low heat rejection diesel engine
dc.type Article
dc.identifier.volume 47
dc.identifier.startpage 1096
dc.identifier.endpage 1106
dc.contributor.department Sakarya Üniversitesi/Mühendislik Fakültesi/Makine Mühendisliği Bölümü
dc.contributor.saüauthor Büyükkaya, Ekrem
dc.contributor.saüauthor Cerit, Muhammet
dc.relation.journal INTERNATIONAL JOURNAL OF THERMAL SCIENCES
dc.identifier.wos WOS:000257405000013
dc.identifier.doi 10.1016/j.ijthermalsci.2007.07.009
dc.identifier.eissn 1778-4166
dc.contributor.author Büyükkaya, Ekrem
dc.contributor.author Cerit, Muhammet


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record