dc.contributor.authors |
Sengil, IA; Ozacar, M; |
|
dc.date.accessioned |
2020-02-24T14:14:24Z |
|
dc.date.available |
2020-02-24T14:14:24Z |
|
dc.date.issued |
2009 |
|
dc.identifier.citation |
Sengil, IA; Ozacar, M; (2009). The decolorization of CI Reactive Black 5 in aqueous solution by electrocoagulation using sacrificial iron electrodes. JOURNAL OF HAZARDOUS MATERIALS, 161, 1376-1369 |
|
dc.identifier.issn |
0304-3894 |
|
dc.identifier.uri |
https://doi.org/10.1016/j.jhazmat.2008.04.100 |
|
dc.identifier.uri |
https://hdl.handle.net/20.500.12619/44737 |
|
dc.description.abstract |
The removal of color from synthetic wastewater containing Reactive Black 5 was experimentally investigated using direct current electrocoagulation at iron electrodes. The effects of operational parameters such as current density, initial pH, electrolysis time, initial dye concentration and solution conductivity on color removal efficiency were investigated in this study. The optimum operating range for each of these operating variables was experimentally determined. The experimental results show that the color of Reactive Black 5 in the aqueous phase was removed effectively. Under the conditions of an initial dye concentration of 100 mg L(-1), initial pH of 5, current density of 4.575 mA cm(-2), salt concentration of 3000 mg L(-1), temperature of 20 degrees C, and interelectrode distance of 2.5 cm, the color removal efficiency reached 98.8%. Electrical energy consumption in the above conditions for the decolorization of the dye solution containing Reactive Black 5 was 4.96 kWh/kg dye. Results show that the first-order rate equation provides the best correlation for the decolorization rate of Reactive Black 5. (c) 2008 Elsevier B.V. All rights reserved. |
|
dc.language |
English |
|
dc.publisher |
ELSEVIER SCIENCE BV |
|
dc.subject |
Environmental Sciences & Ecology |
|
dc.title |
The decolorization of CI Reactive Black 5 in aqueous solution by electrocoagulation using sacrificial iron electrodes |
|
dc.type |
Article |
|
dc.identifier.volume |
161 |
|
dc.identifier.startpage |
1369 |
|
dc.identifier.endpage |
1376 |
|
dc.contributor.department |
Sakarya Üniversitesi/Mühendislik Fakültesi/Çevre Mühendisliği Bölümü |
|
dc.contributor.saüauthor |
Şengil, İsmail Ayhan |
|
dc.contributor.saüauthor |
Özacar, Mahmut |
|
dc.relation.journal |
JOURNAL OF HAZARDOUS MATERIALS |
|
dc.identifier.wos |
WOS:000262292400102 |
|
dc.identifier.doi |
10.1016/j.jhazmat.2008.04.100 |
|
dc.contributor.author |
Şengil, İsmail Ayhan |
|
dc.contributor.author |
Özacar, Mahmut |
|