Açık Akademik Arşiv Sistemi
Browsing Fakülteler / Faculties by Subject "Metallurgy & Metallurgical Engineering"
- DSpace Home
- →
- Fakülteler / Faculties
- →
- Browsing Fakülteler / Faculties by Subject
JavaScript is disabled for your browser. Some features of this site may not work without it.
Browsing Fakülteler / Faculties by Subject "Metallurgy & Metallurgical Engineering"
Now showing items 1-20 of 98
-
(PERGAMON-ELSEVIER SCIENCE LTD, 1997)
-
(ELSEVIER SCIENCE SA, 2019)This multidisciplinary study paves way to investigate the crucial of fundamental characteristic properties including the bulk density, electrical, superconducting, flux pinning mechanism, crystal structure quality and ...
-
(ELSEVIER SCIENCE INC, 2007)In the present study, the effects of re-solution treatment of AA2618 aluminum alloy has been investigated. Solution heat treatments of 520-640 degrees C for 14-24 h were applied followed by artificial aging. Characterization ...
-
(ELSEVIER SCIENCE SA, 2016)We have performed an ab initio study of electronic, vibrational and superconducting properties of the orthorhombic MgPtSi by employing the density functional theory, a linear-response formalism, and the plane-wave ...
-
(ELSEVIER SCIENCE SA, 2015)Cycling stability of pure tin electrodes was aimed to improve by using suitable combination of nickel and multiwalled carbon nanotubes (MWCNTs). Nanocrystalline Sn-Ni/MWCNT composite was prepared by ultrasonic-pulse ...
-
(TANGER LTD, 2012)Plasma sprayed thermal barrier coatings (TBCs) are widely used in gas turbines to reduce thermal effect and increase turbine efficiency. Depending on the application of plasma spray coating, different characteristics are ...
-
(ELSEVIER SCIENCE BV, 2012)Valonia tannin (VT) was gelated through polymerization with formaldehyde to prepare an adsorbent, which was found effective to remove Ag+ from aqueous solution. The adsorption-desorption behaviors of valonia tannin resin ...
-
(SPRINGER-VERLAG SINGAPORE PTE LTD, 2016)Hydroxyapatite (HA) is one of the most significant calcium phosphate bio-ceramic which is used commercially in biomedical application due to its similar structure with natural bone, bioactivity, and stability in body fluid. ...
-
(ELSEVIER SCIENCE SA, 2010)In this study, as an alloying element the effect of cobalt addition by 2.5 wt.% and 5 wt.% on the NiAl intermetallic compound produced by pressure-assisted combustion synthesis method was investigated. As starting materials ...
-
(ELSEVIER SCIENCE INC, 2008)Red mud is a waste and tail material from primary aluminum production, and is named for its color, coming from its iron oxide content. The quantity of red mud is almost equal to the primary aluminum production and leads ...
-
(ELSEVIER SCIENCE SA, 2019)Ti-48Al-10Cr (at.%) intermetallic alloy was produced by electric current assisted sintering (ECAS) technique. The oxidation and hot corrosion behaviors of intermetallic alloys were investigated in the cyclic conditions at ...
-
(CARL HANSER VERLAG, 2000)In this investigation. an attempt has been made to examine the wear response of some modified zinc-aluminum based alloys and two conventional bearing alloys at the sliding speeds of 0.65, 1.30 and 1.90 ms(-1), over a range ...
-
(ELSEVIER SCIENCE SA, 2016)In this study, electrical properties of mica powder inlaid NR/SBR type elastomer based rubber material have been investigated by dielectric spectroscopy. Electrical modulus of this sample showed dispersion in the frequency ...
-
(ELSEVIER SCIENCE SA, 2000)Machine components suffer from corrosion degradation of fatigue characteristics and improvement can be attained by the application of a nitriding treatment, particularly to low alloy steels. In the present study, the effect ...
-
(TANGER LTD, 2016)Nickel is essential metal due to usage area as stainless steel, non-ferrous alloy production, electroplating and chemical industry. Degradation of nickel sulphides leads to extraction of nickel from laterites. High cost ...
-
(CARL HANSER VERLAG, 1998)The effect of copper addition in the range from 0 to 3 % on the tensile creep behaviour of gravity cast alloy ZA-8 has been investigated at a temperature of 120 degrees C and an applied stress of 40 MPa. It was found that ...
-
(ELSEVIER SCIENCE SA, 2000)Ion nitriding has become a popular thermo-chemical surface treatment, which is being used to develop fatigue and wear characteristics of steels. Besides the increased strength, the formation of high compressive residual ...
-
(CARL HANSER VERLAG, 2005)Multilayer TiAlN and AlN coatings were deposited from two targets onto high speed steel (HSS) and hard metal (HM) substrates by pulsed DC magnetron sputtering. TiAl target power was held constant while aluminum target power ...
-
(TAYLOR & FRANCIS LTD, 2009)The effects of mechanical activation on the soda roasting of chromite were investigated in this study. Structural changes in mechanically activated chromite were examined using X-ray diffraction analysis (XRD), surface ...
-
(CARL HANSER VERLAG, 2017)Aluminium-based powder metallurgy (PM) alloys have a number of advantages over cast and wrought aluminium alloys. These PM alloys can be produced using either prealloyed or elemental premixes, with the latter offering a ...
Now showing items 1-20 of 98
DSpace@Sakarya by Sakarya University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
DSpace@Sakarya:
