Açık Akademik Arşiv Sistemi

Browsing Fakülteler / Faculties by Title

Browsing Fakülteler / Faculties by Title

Sort by: Order: Results:

  • Okumuş, Sefer Cem (TRANS TECH PUBLICATIONS LTD, 2004)
    In this study, low pressure plasma spraying (LPPS) demonstrated as a viable technique to producing fine-grained samples from complex Mo-Si-B intermetallics. Microstructure and oxidation behavior of the coatings were studied.
  • Bindal, Cuma; Zeytin, Sakin (TRANS TECH PUBLICATIONS LTD, 2003)
    In the present study, alumina ceramics containing 99% and 99.8% alumina, which has been studied and indicated reliable performance in vivo and vitro experiments for another ideas before this study, were subjected to the ...
  • Şen, Şaduman; Şen, Uğur; Bindal, Cuma (TRANS TECH PUBLICATIONS LTD, 2004)
    The present study reports on boride layer growth kinetics of borided AISI 4140 steel. Steels were boronized in molten borax, boric acid and ferro-silicon bath at 1123degreesK 1173degreesK and 1223degreesK for 2, 4, 6 and ...
  • Türk, Ahmet (TRANS TECH PUBLICATIONS LTD, 2004)
    In this study, low carbon steel substrate was coated with WC-Ni powder by using plasma spray process in order to increase the wear and corrosion resistance of the material. Wear tests were applied to the produced samples ...
  • Şen, Uğur (TRANS TECH PUBLICATIONS LTD, 2004)
    Thermo-reactive diffusion (N and V) on AISI 1020 steel has been obtained by an initial gas nitriding followed by vanadizing. Vanadizing was performed by pack method in the powder mixture consisting of ferro-vanadium, ...
  • Toplan, Nil; Yılmaz, Fevzi (TRANS TECH PUBLICATIONS LTD, 2004)
    Plasma spraying, originally a surfacing technology used for ceramic coating of metal and non-metal substrates, is also suitable for the production of bulk ceramics, such as pipes, crucibles and sensors, etc. from various ...
  • Türk, Ahmet (TRANS TECH PUBLICATIONS LTD, 2004)
    Ni-graphite coatings, due to their high hardness and chemical inertness, are often used as protective coatings against friction and corrosion. In this paper, the preparation of a nickel-graphite coating on mild steel ...
  • Toplan, Hüseyin Özkan (TRANS TECH PUBLICATIONS LTD, 2004)
    Zinc oxide varistor has classically been prepared by conventional ceramic techniques. In this study, ZnO varistor powder with homogeneous distribution grain size and shape is prepared by both controlled chemical process ...
  • Erturaç, Mehmet Korhan (SCIENTIFIC TECHNICAL RESEARCH COUNCIL TURKEY-TUBITAK, 2012)
    The Ezinepazar-Sungurlu Fault (EzSF) is a major offshoot of the dextral North Anatolian Fault (NAF) zone, which bifurcates from the main fault strand around the Niksar pull-apart basin (37 degrees E) and strikes through ...
  • Şengil, İsmail Ayhan; Özacar, Mahmut (ELSEVIER SCIENCE BV, 2009)
    The biosorption of Cu(II) from aqueous solutions by valonia tannin resin was investigated as a function of particle size, initial pH, contact time and initial metal ion concentration. The aim of this study was to understand ...
  • Şengil, İsmail Ayhan; Özacar, Mahmut (ELSEVIER SCIENCE BV, 2009)
    The biosorption of Cu(II) from aqueous solutions by valonia tannin resin was investigated as a function of particle size, initial pH, contact time and initial metal ion concentration. The aim of this study was to understand ...
  • Tanattı, Nazire Pınar; Mehmetbaşoğlu, Meryem; Şengil, İsmail Ayhan; Halil Aksu; Ebrar Emin (DESALINATION PUBL, 2019)
    Biodiesel wastewaters contain high amounts of oil, methanol, soap and glycerin. These wastewaters pollutant concentrations as chemical oxygen demand (COD), total organic carbon (TOC), glycerin and Me0H are fluctuating in ...
  • Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2011)
    The present study reports on kinetics of bonded AISI M2 high speed steel. Boronizing thermochemical treatment was carried out in a solid medium consisting of EKabor powders at 850 degrees C, 900 degrees C and 950 degrees ...
  • Çelebi Efe, Gözde Fatma; İpek, Mediha; Özbek, İbrahim; Bindal, Cuma (ELSEVIER SCIENCE INC, 2008)
    In this study, kinetics of borides formed on the surface of 31CrMoV9 and 34CrAlNi7 steels borided in solid medium consisting of Ekabor II at 850-900-950 degrees C for 2, 4, 6 and 8 h were investigated. Scanning electron ...
  • Özbek, İbrahim; Genel, Kenan; Bindal, Cuma (2003)
  • Özbek, İbrahim; Genel, Kenan; Bindal, Cuma (2003)