Açık Akademik Arşiv Sistemi

Browsing Fakülteler / Faculties by Author "Bindal, Cuma"

Browsing Fakülteler / Faculties by Author "Bindal, Cuma"

Sort by: Order: Results:

  • An Evaluation of Cu-B4C Composites Manufactured by Powder Metallurgy 
    Yener, Tuba; Altınsoy, İbrahim; S. C. Yener; Yener, Şuayb Çağrı; Çelebi Efe, Gözde Fatma; Özbek, İbrahim; Bindal, Cuma (POLISH ACAD SCIENCES INST PHYSICS, 2015)
    In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...
  • An evaluation of human articular cartilage on femoral head 
    Zeytin, Sakin; İpek, Mediha; Bindal, Cuma (ELSEVIER SCIENCE BV, 2002)
    In this study, we investigated stress relaxation behavior of the human articular cartilage on femoral head. Articular cartilage is a white dense connective tissue that covers the bone ends within diarthrodial joints and ...
  • An investigation of the effect of SiC particle size on Cu-SiC composites 
    Çelebi Efe, Gözde Fatma; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (ELSEVIER SCI LTD, 2012)
    In this study mechanical properties of copper were enhanced by adding 1 wt.%, 2 wt.%, 3 wt.% and 5 wt.% SiC particles into the matrix. SiC particles of having 1 mu m, 5 mu m and 30 mu m sizes were used as reinforcement. ...
  • An investigation on boriding kinetics of AISI 316 stainless steel 
    Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2008)
    Boronizing was performed by using a solid medium of Ekabor powders at 1073, 1148 and 1223 K for 2, 4 and 8 h. After boronizing, the major dominant phase was found to be Fe2B and the minors were CrB and Ni2B. Boride coating ...
  • Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF 
    Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)
    Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...
  • Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF 
    Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)
    Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...
  • Biomimetric coating of monophasic brushite on Ti6Al4V in new m-5xSBF 
    Türk, Serbülent; Türk, Serbülent; Altınsoy, İbrahim; Çelebi Efe, Gözde Fatma; İpek, Mediha; Özacar, Mahmut; Bindal, Cuma (ELSEVIER SCIENCE SA, 2018)
    Ti6Al4V plates were exposed to soaking alkali treatment resulted in Na0.23TiO2 phase on the surface before realizing biomimetic Calcium-Phosphate (CaP) coating in prepared m-5xSBF and 5xSBF solutions at 37 degrees C and ...
  • Boriding response of AISI W1 steel and use of artificial neural network for prediction of borided layer properties 
    Genel, Kenan; Özbek, İbrahim; Kurt, Ali Vasfi; Bindal, Cuma (ELSEVIER SCIENCE SA, 2002)
    In the present study, boriding response of AISI W1 steel and prediction of boride layer properties were investigated by using artificial neural network (ANN). Boronizing heat treatment was carried out in a solid medium ...
  • Boriding response of AISI W1 steel and use of artificial neural network for prediction of borided layer properties 
    Genel, Kenan; Özbek, İbrahim; Kurt, Ali Vasfi; Bindal, Cuma (ELSEVIER SCIENCE SA, 2002)
    In the present study, boriding response of AISI W1 steel and prediction of boride layer properties were investigated by using artificial neural network (ANN). Boronizing heat treatment was carried out in a solid medium ...
  • Characterization of borided AISI 316L stainless steel implant 
    Özbek, İbrahim; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2002)
    The present study reports on characterization of borided AISI 316L stainless steel implant. Boronizing heat treatment was performed on a cylindrical bar of AISI 316L austenitic surgical stainless steel with a diameter of ...
  • Characterization of borides formed on impurity-controlled chromium-based low alloy steels 
    Bindal, Cuma (ELSEVIER SCIENCE SA, 1999)
    This study reports on characterization of borides formed on impurity-controlled steels essentially containing 0.3% C, 0.20 P, 0.5% Cr; 0.3% C, 0.02% P, and 1.0% Cr. The formation of borides on the impurity-controlled ...
  • Characterization of boriding of 0.3% C, 0.02% P plain carbon steel 
    Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2007)
    In the present study, some mechanical properties of borides formed on the impurity-controlled plain carbon steel essentially containing 0.3% C, 0.02% P in weight was investigated. The formation of borides on the concerned ...
  • Characterization of cemented Cu matrix composites reinforced with SiC 
    Çelebi Efe, Gözde Fatma; Altınsoy, İbrahim; Yener, Tuba; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2010)
    In this study some properties of copper produced by cementation method and its composites reinforced with 1wt% 2wt% 3wt% and 5wt% SiC particles produced by powder metallurgy method were investigated Composite powders were ...
  • Characterization of cryogenic heat treated Vanadis 4 PM cold work tool steel 
    Altınsoy, İbrahim; İpek, Mediha; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2011)
    The amount of retained austenite in the quenched cold work tool steel sample is 17.7%, in the condition of sub-zero heat treated and double tempered samples following by quenching is 1.9% determined by XRD analysis. The ...
  • Characterization of NiAl with cobalt produced by combustion synthesis 
    Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (ELSEVIER SCIENCE SA, 2010)
    In this study, as an alloying element the effect of cobalt addition by 2.5 wt.% and 5 wt.% on the NiAl intermetallic compound produced by pressure-assisted combustion synthesis method was investigated. As starting materials ...
  • Characterization of Plasma Nitrided X32CrMoV33 Die Steel 
    Türk, Ahmet; Bindal, Cuma (TAYLOR & FRANCIS INC, 2009)
    In this study, nitriding behavior of plasma nitrided X32CrMoV33 die steel was investigated. Nitriding process was carried out at temperatures of 450, 500, and 550 degrees C for treatment time in the range of 2-32h. Depending ...
  • Characterization of transfer layers on steel surfaces sliding against diamond-like hydrocarbon films in dry nitrogen 
    Bindal, Cuma (ELSEVIER SCIENCE SA, 1995)
    Carbon-rich transfer layers on sliding contact surfaces play important roles in the tribological performance of diamond-like hydrocarbon (DLHC) films. In this study, we investigated the nature of these layers formed on M50 ...
  • Characterization of two-phase nickel aluminides produced by pressure-assisted combustion synthesis 
    Özdemir, Özkan; Zeytin, Sakin; Bindal, Cuma (PERGAMON-ELSEVIER SCIENCE LTD, 2007)
    Two-phase (B2 + L1(2)) nickel aluminide intermetallic compounds were synthesized by the pressure-assisted volume combustion synthesis (CS). The production and characterization of the samples containing NiAl + Ni3Al were ...
  • Characterization of UHWPE-TiO2 Composites Produced by Gelation/Crystallization Method 
    Çelebi Efe, Gözde Fatma; Bindal, Cuma; A. H. Ucisik (POLISH ACAD SCIENCES INST PHYSICS, 2017)
    In this study, ultra-high molecular weight polyethylene (UHMWPE) - TiO2 composites reinforced with TiO2 particles with weight ratios of 0.5, 1 and 2% were produced by gelation/crystallization method in decalin+antioxidant ...
  • Dielectric characterization of BSA doped-PANI interlayered metal-semiconductor structures 
    Nursel Karaoglan; Habibe Uslu Tecimer; Semsettin Altindal; Bindal, Cuma (SPRINGER, 2019)
    The measured capacitance and conductance-voltage (C & G/omega-V) data between 1 and 200 kHz of Al/(BSA-doped-PANI)/p-InP structure were examined to uncover real and imaginary components of complex permittivity (epsilon* = ...