In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...

In this paper, the current, voltage and temperature of the container of an electric current-activated/assisted sintering (ECAS) system are measured and recorded with respect to time during the sintering process. By ...

In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting ...

The present study reports on iron (Fe) silicides produced on 31CrMoV9 steel by using the pack-cementation method. Pack siliconizing was carried out using metallic silicon (Si), ammonium chloride (NH4Cl) and alumina (Al2O3) ...

Bu tez çalışmasında, intermetalik (Ti-Al sistemi) fazın yüksek mukavemet ve katılığı, metalik fazın yüksek tokluğu, seramik malzemelerin sertliği gibi iyi ve faydalı özelliklerini kombine edecek şekilde, metalik-intermetalik, ...

This study focuses on investigating the fabrication of in-situ intermetallic NiTi composites from a powder mixture containing the mass fractions 50 % nickel powder and 50 % titanium powder. The elemental powders were mixed ...

In this research Ni-NiAl3 multilayer composites were produced through reactive sintering in an open atmosphere using Ni and Al foils with a 250-mu m initial thickness. The sintering was performed at 700 degrees C under 2 ...

Electric current assisted sintering (ECAS) can be a new production method for high entropy alloy production due to its advantages such as low sintering temperature and short holding time. In this study, production of ...

Resistive sintering is a new method which enables the production of different material types by using mechanical load and electric current. For the required process performance, it is necessary to set the parameters such ...