Micro arc oxidized TiO2 coatings were prepared in different concentrations of (CH3COO)(2)Ca center dot H2O and different coating times on biomedical Ti6Al4V alloy. The surface topography, phase, and element composition of ...

Micro-arc oxidation (MAO) coating was prepared on Ti6Al4 V alloy in the electrolyte based on different ratios of calcium acetate and a fixed ratio of sodium phosphate with/without Ag additive. The surface, elemental and ...

This paper investigates the effect of different electrolytes containing silicate and phosphate by two-step oxidation using the micro-arc oxidation technique. The growth effect, surface roughness, and element distributions ...

Bu çalışmada, çeliklere yakın özelliklere sahip olan küresel grafitli dökme demir numunelerinin yüzey özellikleri iyileştirilerek, yaygın olarak kullanılan geleneksel yüzey işlemlerine alternatif bir yöntem olarak Elektrolitik ...

Oxide coatings were formed by micro arc oxidation (MAO) on an AM60 magnesium alloy substrate. The effects of Na2SiF6 in an electrolytic solution on the micro arc oxidation process and the structure and mechanical properties ...

In this study, wear and electrochemical corrosion behaviour of as-cast magnesium (Mg)/multiwall carbon nanotube (MWCNT) and plasma electrolytic oxidation (PEO) coated Mg/MWCNT samples were evaluated by dry sliding wear ...

Hard coatings such as nickel, chromium and tungsten can improve the surface properties of the substrate. The coating surfaces have been developed for increase of the wear resistance, hardness or corrosion resistance for ...

Ceramic oxide coatings were fabricated on Ti6A14V alloy by micro arc oxidation (MAO) in silicate electrolytes, with nano-TiO2 and nano-Al2O3 and without nano-additives Effects of nano additives on the structural and ...

Ceramic oxide coatings were fabricated on Ti6A14V alloy by micro arc oxidation (MAO) in silicate electrolytes, with nano-TiO2 and nano-Al2O3 and without nano-additives Effects of nano additives on the structural and ...

This study aimed to improve the tribological behavior of electrolytic plasma treated (EPT) ductile iron (DI). For this purpose, ductile iron was electrolytic plasma hardened under different processing parameters (treatment ...