DSpace Home
→
Browsing by Author

Browsing by Author "Şevik, Hüseyin"

Now showing items 1-8 of 8

Alümina partikül takviyeli AI-Sİ esaslı kompozitlerin basınçlı döküm yöntemi ile üretilmesi ve özelliklerinin incelenmesi

Şevik, Hüseyin (Sakarya Üniversitesi, 2004)

ÖZET Anahtar Kelimeler: Al-Si alaşımı, basınçlı döküm, kompozit, aşınma. Alüminyum ve alaşımlarını pek çok uygulama için uygun ve ekonomik kılan özelliklerin başında; görünümü, hafifliği, işlenebilirliği, fiziksel ve mekanik ...
Comparison of the wear properties of modified ZA-8 alloys and conventional bearing bronze

Türk, Ahmet; Kurnaz, Süleyman Can; Şevik, Hüseyin (ELSEVIER SCI LTD, 2007)

In this study, an attempt has been made to examine the wear response of some modified Zn-Al based alloys and a conventional bearing bronze (SAE 660) at the sliding speeds of 0.5 ms(-1), I ms(-1), 1.3 ms(-1), 1.7 ms(-1) and ...
Influence of silver addition on the microstructure and mechanical properties of squeeze cast Mg-6Al-1Sn-0.3Mn-0.3Ti

Açıkgöz, Şehzat; Şevik, Hüseyin; Kurnaz, Süleyman Can (ELSEVIER SCIENCE SA, 2011)

In this study, the effect of silver (0, 0.2, 0.5, and 1 wt.%) on the microstructure and mechanical properties of a magnesium-based alloy (Mg-Al 6 wt.%-Sn 1 wt.%-Mn 0.3 wt.%-Ti 0.3 wt.%) were investigated. The alloys were ...
Influence of titanium and chromium addition on the microstructure and mechanical properties of squeeze cast Mg-6Al alloy

Kurnaz, Süleyman Can; Şevik, Hüseyin; Açıkgöz, Şehzat; Özel, Ahmet (ELSEVIER SCIENCE SA, 2011)

In this study, the effect of titanium and chromium (0, 0.1, 0.2, 0.3, and 0.4 wt%) on the microstructure, mechanical and wear properties of a magnesium-based alloy (Mg-Al 6 wt%) were investigated. The alloys were produced ...
Magnezyum alaşımlarının kontrollü atmosferde basınçlı döküm yöntemi ile üretilmesi ve alaşım elementlerinin özelliklere etkisinin incelenmesi

Şevik, Hüseyin (Sakarya Üniversitesi, 2011)

Bu çalışmada, magnezyum-alüminyum esaslı bir alaşım olan Mg-6Al alaşımının üretimi, kontrollü atmosferde, sıkıştırma döküm yöntemi kullanılarak gerçekleştirilmiştir. Sonrasında manganez ve titanyum elementi ayrı ayrı ...
Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting

Şevik, Hüseyin; Kurnaz, Süleyman Can (ELSEVIER SCI LTD, 2006)

In this study, metal-matrix composites of an aluminum-silicon based alloy (LM6) and Al2O3 particles with volume fractions of 0.05, 0.10 and 0.15 and in size of 44, 85 and 125 mu m were produced using pressure die-casting ...
The effect of Ti-B and Sr on the mechanical behaviour of the zinc-aluminum-based ZA-12 alloy produced by gravity casting

Kurnaz, Süleyman Can; Şevik, Hüseyin; Türk, Ahmet; Özsaraç, Uğur (CARL HANSER VERLAG, 2006)

In this study, the effect of Ti-B (0.05-0.7 wt.% Ti, 0.01 - 0.13 wt.% B) and Sr additions (0.05-0.7 wt.%) on the hardness, ultimate tensile strength (UTS), strain and fatigue properties of the gravity cast Zn-Al-based ZA-12 ...
The effect of tin addition on the microstructure and mechanical properties of squeeze cast AM60 alloy

Şevik, Hüseyin; Açıkgöz, Şehzat; Kurnaz, Süleyman Can (ELSEVIER SCIENCE SA, 2010)

In this study, the effect of tin addition (0, 0.5,1, 2 and 4 wt% Sn) on the microstructure and mechanical properties of a magnesium-based alloy (AM60) were investigated. The alloys were produced under a controlled atmosphere ...